Since 1983, Wilson has produced the combo trailer longer than any current manufacturer in North America. When Wilson introduced the combination steel aluminum trailer, they ushered in a new era with significantly reduced trailer weights without diminished capacities. With a maximum distributed load capacity of 80,000 lb., the Roadbrute has a patented aluminum side rail system with many securement options to handle your loads.
LENGTH |
Available in 40'-0" through 53'-0" overall length(s) in even one-foot increments.
|
---|---|
WIDTH |
Nominal 96" standard; 102" width available as extra-cost option.
|
HEIGHT |
56-1/4" - no load on 11-24.5 tires.
|
KING PIN |
Corsol™ treated ladder frame assembly. Standard setting is 30". Other settings available.
|
LANDING GEAR |
Holland Atlas 55, 2-speed, located 145" from front of trailer; aluminum braces are standard.
|
---|---|
FRONT |
6-1/4" high extruded aluminum channel; 2-piece front channel standard with 2-cast rounded corners. Extra stake pockets are available as an extra cost option.
|
SPARE TIRE CARRIER |
Optional at extra cost.
|
SIDES |
TJ-style side rails are 6-1/4" high extruded aluminum channel incorporating a "Quick Tie" load securement system. Stake pockets are 3-1/2" wide x 1-5/8" deep x 4-1/2" high on 18" centers. (24" centers are optional.) Integral to the side rail is a double "L" winch track for sliding winches. Patent pending. (C-style side rail optional.)
|
MAIN BEAMS |
I-beams are fabricated of 130K steel, with 3/8" x 5" flanges. The main beams for the CF-1080 are 8-3/4" deep at the front, 25" deep in belly and 18" at the rear. (CF-1060: 7" deep at the front, 23" deep in the belly and 18" at the rear – 18". CF-1090: 10-3/4" deep at the front, 29" deep in the belly and 18" at the rear.) The trailer crown is cut into the web section; 3 sets of full depth internal cross structure to stabilize beams.
|
CROSSBARS |
Extruded aluminum T-J type, 4-1/2"" high, on 12" centers in the king pin area; and 18" center in the balance of the trailer. 12" and 15" center spacing full length is optional.
|
FLOOR |
1-3/8" aluminum floor with 4 nailer strips is standard. Other floor materials are available as an extra option. Other nailer options are available.
|
REAR END |
Extruded aluminum rear end with two horizontal rubber bumpers. R.I.G. Bumper: aluminum tube construction is standard. Rear Stake Pockets: (4) aluminum, 3-1/2" wide x 1-5/8" deep x 4-1/2" high, flush with top of channel.
|
MUD FLAPS |
Black rubber, anti-spray/anti-sail type is standard.
|
LIGHTS |
System: 12 volt I.C.C. standard equipment with 7-way connector. Grote internal ground wiring harness with Ultra-Blue sealed trailer wiring system and Grote LED lights are standard. Exterior lights are Grote MicroNova™ oval grommet mounted lights. Combination Turn/Clearance lights is standard. Tail lights are Lexan, factory sealed, and rubber grommet mounted, and consist of 2 groups of 3 individual STOP & TURN tail light units: one group on each side of rear end. Clearance & marker lights, conspicuity tape, and license plate light are standard. See Light Standard Bulletin.
|
---|---|
SUSPENSION |
Hendrickson AANT-23K air ride is standard. The standard axle spread is 10'-1" (3.07 m). Various axle spreads, air and spring rides are available as options.
|
AXLES |
Two: 5-3/4" round, rated at 23,000 lb. (10,215 kg), integral with suspension.
|
BRAKES |
16-1/2" x 7" x 5/8" with HXS extended service brake package, single anchor pin, air brakes, no dust shields. Mandatory FMVSS-121 and ABS anti-lock braking system standard.
|
HUBS |
Dura-Lite, steel.
|
DRUMS |
Cast steel, outboard mount, hub-piloted, with Federal Mogul severe service oil seals.
|
WHEELS |
Eight, 8.25 x 24.5, white, steel disc.
|
TIRES |
Eight 11-24.5 Radial Bridgestone R196.
|
FINISH |
All steel components are cleaned chemically, rinsed, and primed with a VOC-compliant, two-component urethane HS primer for rust protection, followed by a finish coat application of VOC-compliant HS acrylic urethane paint in a choice of Silver, White, Black, Dark Blue, or Red standard colors. All aluminum components are left natural.
|
We want you to contact us whether you are buying a trailer, seeking parts or service, looking for directions or an answer to a question. Allow us the opportunity to enhance your personal experience with Wilson Trailer.
Wilson Trailer Corporate Headquarters
4400 S. Lewis Boulevard
PO Box 6300
Sioux City, IA 51106